Descargar Imprimir esta página

Instalación - Gewiss Chorus VELIA GW19216WH Manual De Instalación

Publicidad

1
2
1
2
3
4
5
6
1
2
7
- INSTALLAZIONE
IT
Sganciare l'apparecchio dal supporto plastico,
facendolo scorrere su di esso dopo aver premuto
il pulsante plastico (figura 1).
Fissare il supporto plastico alla scatola d'incasso
tonda Ø 60 mm (figura 2), alla scatola rettan-
golare GW24403 (figura 3) o a parete (figura 4)
utilizzando le viti in dotazione e rispettando l'in-
dicazione ALTO .
La scatola deve essere installata ad un'altezza
adeguata all'utente.
Evitare il serraggio eccessivo delle viti.
Effettuati i collegamenti, agganciare il terminale
al supporto plastico (figura 5-6).
Per sganciare l'apparecchio dal supporto plastico
premere il gancio plastico e sollevare il terminale
(figura 7).
- INSTALLATION
EN
Remove the unit from the plastic support by sli-
ding it after pressing the plastic button (figura 1).
Fasten the plastic support to the round built-in
box of Ø 60 mm (figure 2) or to the rectangu-
lar box GW24403 (figure 3) or it may be wall-
mounted using (figura 4) the provided screws
and observing the UP indication .
The recessed box must be fitted at a suitable
height in relation to the user.
Avoid excessive tightening of the screws.
Once the connections have been made, hook
the terminal to the plastic support (figure 5-6). To
release the unit from the plastic support, press
the plastic hook and lift the terminal (figure 7).
- INSTALLATION
DE
Das Gerät an der Kunststoffhalterung aushän-
gen, dabei nach dem Drücken der Kunststoff-
taste das Gerät auf der Halterung verschieben
(Abbildung 1).
Die Kunststoffhalterung am runden Unterputz-
kasten Ø 60 mm (Abbildung 2) oder am recht-
eckigen Gehäuse GW24403 befestigen (Abbil-
dung 3) oder an der Wand mit Klemmendeckeln
(Abbildung 4), hierfür die beiliegenden Schrau-
ben benutzen und die Angabe OBEN beachten
.
Der Kasten muss auf für den Benutzer geeigneter
Höhe installiert werden.
Die Schrauben nicht zu stark anziehen.
Nach den Anschlüssen das Terminal an der
Kunststoffhalterung einhängen (Abbildung 5-6).
Um das Gerät von der Kunststoffhalterung aus-
zuklinken den Plastikhaken drücken, und das
Terminal anheben (Abbildung 7).
110
- INSTALLATION
FR
Retirer l'appareil du support en plastique, en le
faisant glisser sur lui-même après avoir appuyé
sur la touche plastique (figura 1).
Fixer le support en plastique au boîtier d'encas-
trement rond Ø 60 mm (figure 2) ou au boîtier
rectangulaire GW24403 (figura 3) ou sur le mur
(figura 4), en utilisant les vis fournies et en res-
pectant l'indication HAUT .
Le boîtier doit être installé à une hauteur adé-
quate pour l'utilisateur.
Éviter de serrer excessivement les vis.
Une fois les raccordements effectués, fixer le ter-
minal au support en plastique (figure 5-6).
Pour retirer l'appareil du support en plastique,
appuyer sur le clip en plastique et soulever le
terminal (figure 7).
- INSTALACIÓN
ES
Desenganche el aparato del soporte de plástico,
pulsando el botón de plástico y haciendo que se
deslice (figura 1).
Fije el soporte de plástico a la caja empotrable
redonda Ø 60 mm (figura 2) o a la caja rectangu-
lar GW24403 (figure 3) o sobre una pared (figure
4) utilizando los tornillos suministrados y respe-
tando la indicación ALTO .
La caja debe instalarse a una altura adecuada
para el usuario.
No apriete demasiado los tornillos. Una vez reali-
zadas las conexiones, enganche el terminal al so-
porte de plástico (figura 5-6). Para desenganchar
el aparato del soporte de plástico, pulse el gan-
cho de plástico y levante el terminal (figura 7).
- INSTALAÇÃO
PT
Solte o aparelho do suporte de plástico, fazen-
do-o deslizar sobre o mesmo após ter premido o
botão de plástico (figura 1).
Fixar o suporte de plástico à caixa de encastre re-
donda Ø 60 mm (figura 2) ou à caixa retangular
GW24403 (figura 3) ou na parede (figura 4) uti-
lizando os parafusos fornecidos e respeitando a
indicação ALTO .
A caixa deve ser instalada a uma altura adequada
para o utente.
Evite o aperto excessivo dos parafusos.
Após efectuar as ligações, enganche o terminal
no suporte de plástico (figura 5-6).
Para desprender o aparelho do suporte de plá-
stico carregue o gancho plástico e levante o ter-
minal (figura 7).
31
60
3

Publicidad

loading

Este manual también es adecuado para:

Chorus velia gw19216bk