Powermate ® Care; Belt Changing And Agitator Cleaning - Kenmore Elite 125.81714610 Manual De Uso Y Cuidado

Always follow all safety precautions when performing maintenance to the PowerMate
WARNING
Electrical Shock Or Personal Injury Hazard
$OZD\V WXUQ Rç DQG XQSOXJ YDFXXP
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.

BELT CHANGING AND AGITATOR CLEANING

TO REMOVE BELT
®
1. Turn PowerMate upside down and remove
six (6) screws.
®
2. Turn PowerMate right side up. Press
handle release pedal and lower the swivel.
Loosen the rear latches located below the
SHGDOV $ pDWKHDG VFUewdriver may be
required.)
POWERMATE
3. Grasp cover
by rear and pull
up to remove it
from base.
- 20 -
®
CARE
4. /LIW Rç
agitator
cover
6. Check and clean end cap areas. See
AGITATOR ASSEMBLY (page 21) for picture
of complete agitator assembly.
®
.
5. Lift agitator
assembly out
and remove
worn belt.