Powermate ® Care - Kenmore BC4027 Manual De Uso Y Cuidado

Always follow all safety precautions when performing maintenance to the PowerMate
WARNING
Electrical Shock Or Personal Injury Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
1. Turn PowerMate
®
six (6) screws.
2. Turn PowerMate
®
handle release pedal and lower the swivel.
Loosen the rear latches located below the
pedals. (A flat-head screwdriver may be
required.)
POWERMATE
upside down and remove
right side up. Press
3. Grasp cover
by rear and pull
up to remove it
from base.
CARE
®
4. Lift off
agitator
cover
6. Check and clean end cap areas. See
AGITATOR ASSEMBLY (page 22) for picture
of complete agitator assembly.
- 20 -
.
®
5. Lift agitator
assembly out
and remove
worn belt.