Powermate ® Care - Kenmore BC4026 Manual De Uso Y Cuidado

Always follow all safety precautions when performing maintenance to the PowerMate
WARNING
Electrical Shock Or Personal Injury Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.
BELT CHANGING AND BRUSHROLL CLEANING
TO REMOVE BELT
1. Turn PowerMate
®
upside down and
remove four (4)
screws.
2. Turn PowerMate
handle release pedal and lower the swivel.
Loosen the rear and side latches. (A flat-
head screwdriver may be required.)
POWERMATE
right side up. Press
®
CARE
®
3. To remove cover, grasp the rear and pull
up.
4. Lift brushroll assembly out and remove
worn belt.
Brushroll
5. Check and clean end cap areas. See
BRUSHROLL ASSEMBLY (page 21) for picture
of complete brushroll assembly.
- 20 -
.
®