Publicidad
3.
Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 2 3/4 in. (70 mm). Be sure you drill into the center of the stud.
4.
Install the wall plate
12
CAUTION:
Avoid potential personal injury or property damage! All lag bolts
movement of the wall plate
Go to STEP 3 on PAGE 14.
3
2 3/4 in. (70 mm)
7/32 in.
(5.5 mm)
using four (or six) lag bolts
14
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
12
For Extended
Wall Plate
. Firmly tighten all lag bolts
14
14
4
until they are pulled flush against the wall plate
MUST BE firmly tightened to prevent unwanted
20
19
.
12
For Extended
Wall Plate
11
Publicidad
