Publicidad
STEP 2A
Min. 3 1/2 in. (89 mm)
Min. 1 1/2 in. (38 mm)
Min. 16 in. (406 mm)
Max. 5/8 in. (16 mm)
CAUTION
: Avoid potential personal
injuries and property damage!
●
Drywall covering the wall must not
exceed 5/8 in. (16 mm)
●
Minimum wood stud size:
common 2 x 4 in. (51 x 102 mm)
nominal 1½ x 3½ in. (38 x 89 mm)
●
Minimum horizontal space between
fasteners: 16 in. (406 mm)
●
Stud centers must be verified
10
Wood Stud Installation
1.
Locate the stud. Verify the center of the stud using an awl, a thin nail, or an edge to edge stud
finder. Mark the center of the stud with a pencil.
2.
Place the wall plate
plate
and mark the four hole locations.
11
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
1
at your desired height, over your stud center lines. Level the wall
11
2
FOR EXTENDED WALL PLATES:
You MUST install 2 lag bolts
center (top and bottom) of wall plate
then a minimum of 16 in. (406 mm) out from
center, for a minimum of 6 lag bolts total.
19
into the
20
,
19
Publicidad
