Installing The Shear Blades - Makita DUM111 Manual De Instrucciones

Ocultar thumbs Ver también para DUM111:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing the shear blades

1.
Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
2.
Remove the blade cover from the old shear
blades, and then attach it to the new ones.
► 1 . Blade cover
3.
Adjust the three pins so that they are lined up on
the alignment line.
► 1 . Alignment line
2
3
1
1
4.
Apply a small amount of grease to the periphery
of the crank. Attach the crank to the pins with the small
and large rounds facing up.
► 1 . Crank
5.
Adjust the blades and guide plate so that the hole
in the guide plate and the two protrusions on the blades
are lined up.
► 1 . Guide plate
6.
Turn the shear blades upside down and install
them so that the pins on the tool fit in the hole on the
guide plate. Make sure that the shear blades are fixed
securely in place.
► 1 . Guide plate
NOTE: Sliding the blade cover forward slightly makes
it easier to install the shear blades.
12 ENGLISH
1
1
1

Publicidad

Tabla de contenido
loading

Tabla de contenido