Installing Or Removing The Shear Blades For Grass Shear; Removing The Shear Blades; Installing The Shear Blades - Makita XMU04 Manual De Instrucciones

► 1 . Hinge 2. Grass receiver
2. Align the protrusions on the grass receiver with
the grooves on the tool by sliding the grass receiver
toward the front of the tool and moving it in the direction
of the arrow.
NOTICE:
Do not attach the hinge of the grass
receiver to the tool forcibly after aligning the pro-
trusions on the grass receiver with the grooves
on the tool.
Installing or removing the shear
blades for grass shear

Removing the shear blades

1. Remove the grass receiver and place the tool
upside down.
2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
1
2
on the undercover is aligned
3. Remove the undercover, shear blades, and crank.
► 1 . Undercover 2. Shear blades 3. Crank

Installing the shear blades

1. Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
2. Remove the blade cover from the old shear
blades, and then attach it to the new ones.
9 ENGLISH
1
2
3
2 3