Time Display - Beko WMD 57122 Manual Del Usuario

Auxiliary functions
Auxiliary Function Selection Buttons
Select the required auxiliary functions before
starting the program.
C
Some combinations cannot be selected
together.
Auxiliary function selection
If an auxiliary function that should not be selected
together with a previously selected function
is chosen, the first selected function will be
cancelled and the last auxiliary function selection
will remain active.
(Ex.: If you want to select pre-wash first and
then quick wash, Pre-wash will be cancelled and
Quick wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (See, "Program
Selection Table")
C
Auxiliary function buttons may differ
according to the model of your machine.
Pre-wash
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time.
C
Pre-wash without detergent is
recommended for lace and curtains.
Quick program
This function can be used for "Cottons" and
"Synthetics" programs. It decreases the washing
times for lightly soiled laundries and also the
number of rinsing steps.
Rinse Plus
This function allows your machine to perform
an extra rinsing in addition to the rinsing cycles
performed by your machine after main washing
cycle. Thus, the risk for sensitive skins (babies,
allergic skins and etc.) to be effected by the
minimal detergent remnants on the laundry is
reduced.
No Heat
If you wish to wash your clothes in cold water,
you can use this program.
C
Use this function for delicate laundries
that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
program table.

Time display

The display shows the time remaining for the
program to complete while a program is running.
Time is displayed in hours and minutes as
"01:30".
C
Program duration may differ from the
values in the consumption table subject
to the changes in the water pressure,
water hardness and temperature, ambient
temperature, type and amount of laundry,
auxiliary functions selected, and changes
in the supply voltage.
Time delay
With the "Time delay" function you can delay the
program start up to 24 hours. Time delay can be
increased in half hour increments.
C
Do not use liquid detergent when you set
time delay! There is the risk of staining of
the clothes.
1. Open the loading door, place the laundry
inside and fill detergent drawer.
2. Set the washing program, spin speed
and, if required, select the auxiliary
functions.
3. Press "Time Delay" buttons to adjust the
desired time.
4. Press Start/Pause/Cancel button. The
time delay will start to count down. The ":"
in the middle of the displayed time delay
will start to flash.
C
More laundry may be loaded during the
time delay period.
5. At the end of the time delay count down,
":" will light up continuously and the
relevant program follow-up light will light
up according to the selected program.
Changing the delay time
If you want to change the time during the
countdown:
1. Press "Start/Pause/Cancel" button. The
":" in the middle of the screen will stop
flashing.
2. Press "Time Delay" (+/-) button to adjust
the desired time delay.
3. Press "Start/Pause/Cancel" button.
4. The ":" in the middle of the displayed time
delay will start to flash.
Canceling the time delay
If you want to cancel the time delay countdown
and start the program:
1. Press "Start/Pause/Cancel" button. The
":" in the middle of the displayed time
delay will stop flashing.
2. Press "Time Delay" (-) button to decrease
the time delay. "0" will appear on the
display.
3. Press "Start/Pause/Cancel" button to
start the program.
8 - EN