Time Display; Delayed Start - Beko WMI 81442 Manual Del Usuario

4.11 Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the running
programme by pressing the Start / Pause / Cancel button
when the machine is operating. For this, the machine must
be in a step before the auxiliary function you are going to
select or cancel.
Depending on the programme, press a, b, c or d buttons to
select the desired auxiliary function. Symbol of the selected
auxiliary function appears on the display.
C
Some functions cannot be selected together. If a second
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you want to
select Quick Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will remain
active.
An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
F1 appears on the display when you select this function (a).
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
F2 appears on the display when you select this function (b).
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.
F3 appears on the display when you select this function (c).
• Anti-Creasing
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spinning speed is
limited to prevent creasing. In addition, washing is done with
a higher water level.
F4 appears on the display when you select this function (d).
14 / 68 EN

4.12 Time display

Remaining time to complete the programme appears on the
display while the programme is running. Tim is displayed as
"01:30" in hours and minutes format.
C
Programme time may differ from the values in the
"Programme and consumption table" depending on
the water pressure, water hardness and temperature,
ambient temperature, amount and the type of laundry,
auxiliary functions selected and the changes at the
mains voltage.

Delayed start

With the Delayed Start function the startup of the
programme may be delayed up to 24 hours. Delayed start
time can be increased by increments of 30 minutes.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions. Set the
desired delayed start time by pressing the Delayed Start + or
- buttons. Delayed Start symbol flashes. Press Start / Pause
/ Cancel button. Delayed start countdown starts. Delayed
Start symbol illuminates steadily. Start symbol appears. ":"
sign in the middle of the delayed start time on the display
starts flashing.
C
Additional laundry may be loaded during the delayed
start period. At the end of the countdown, Delayed Start
symbol disappears, washing cycle starts and the time
of the selected programme appears on the display.
Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. ":" sign in the middle of
the delayed start time on the display stops flashing. Pause
symbol appears. Delayed Start symbol flashes. Start symbol
disappears. Set the desired delayed start time by pressing
the Delayed Start + or - buttons. Press Start / Pause /
Cancel button. Delayed Start symbol illuminates steadily.
Pause symbol disappears. Start symbol appears. ":" sign
in the middle of the delayed start time on the display starts
flashing.
Cancelling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Press Start / Pause / Cancel button. ":" sign in the middle
of the delayed start time on the display stops flashing. Start
symbol disappears. Pause symbol and Delayed Start symbol
flashes. Decrease the delayed start time by pressing the
Delayed Start - button. Programme duration appears after
30 minutes. Press Start / Pause / Cancel button to start the
programme.
Washing Machine / User's Manual