Tools And Materials; Before You Begin - Kohler K-5805 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Safety Scissors
Glasses
Sealant
Tape Phillips
Measure Screwdriver

Before You Begin

CAUTION: Risk of personal injury or product damage. Cast
iron sinks are very heavy. Get assistance lifting the sink into
place.
IMPORTANT! Using a support frame is an installation option for all
undercounter cast iron sinks, but is required for K-6498 and K-6499
models. Refer to the "Install the Support Frame" section for this
installation option.
Observe all local plumbing and building codes.
Inspect the drain and supply tubing. Replace if necessary.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
Plan the sink installation so future removal from underneath the
countertop is possible without damaging the countertop.
Use proper fasteners and techniques to ensure that the frame will
support a minimum of 300 lbs (136 kg). Locate the fasteners for
easy access in the event the sink needs to be removed.
1007262-2-G
• 1/2" or larger drill bit
• Rags or paper toweling
• Safety shoes
Keyhole/Compass
• Orbital sander (optional)
Saw
• Support framing
• 1-3/8" hole saw
• Sanding block with various
Pencil
grits of sand paper
• Adjustable wrench
• Pipe wrench
• K-5807 Undermount Sink
Kit (optional)
Hacksaw
Drill
2 Kohler Co.