Operation
Thoroughly clean the appliance and accessories
before using them for the first time.
Note:
VL 040 can only be operated in combination
with VL 041. All operator inputs apply to both hob
ventilators. That is to say: if you set the control knob to
level 1, both hob ventilators are operated at level 1.
Switching on
Turn the control knob to the right to the position you
require (0-4).
Switching off
Turn the control knob to the left to the 0 position.
Care and cleaning
In this chapter you will find tips on how to maintain
and clean your appliance correctly.
m
Risk of burns!
The appliance becomes hot during operation. Allow
the appliance to cool down before cleaning.
m
Risk of electric shock!
Do not use high pressure washers or steam cleaners
to clean the appliance.
Cleaning the appliance
Note:
The appliance's surface and operator controls
are sensitive to scratches. You can obtain suitable
cleaning and care agents for your appliance via the
hotline or the online shop. Observe the warranty
provisions in the attached service booklet and the
following notes on cleaning:
▯
Clean the surfaces with a soft, moist cloth,
detergent or a mild window cleaner. Soften dried-
on soiling with a moist cloth. Do not scrape!
▯
Clean stainless steel surfaces in the grind
direction only.
▯
Do not use a stainless steel cleaner for operator
controls.
Removing and installing the metal
grease filter
1
Detach the ventilation grille.
2
Turn up both retaining wires and remove the
grease filter from the appliance
Insert it in the reverse order.
Cleaning the metal grease filter
The metal grease filters used absorb the greasy
components of kitchen vapour. After normal use (1 to
2 hours daily), clean the metal grease filters
approximately every three months.
Notes
‒
Do not use any aggressive, acidic or alkaline
cleaning agents.
7