Troubleshooting; Technical Data; Disposal - Silvercrest SDB 2400 F4 Instrucciones De Uso

Troubleshooting

Problem
The steam iron blasts
out no steam/very
little steam.
The steam iron does
not get hot.
The steam iron is
defective.

Technical data

Supply voltage
Power consumption

Disposal

Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance through an approved disposal facility or your municipal
waste facility. Please observe the currently applicable regulations. Please contact
your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
Dispose of all packaging materials in an environmentally friendly manner.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites.
■ 12 │ GB │ IE
Cause
The reserves of tap
water in the steam
iron are depleted.
The steam iron is
not plugged in or
is not switched on.
220 – 240 V ∼ (AC), 50/60 Hz
2020 – 2400 W
Solution
Fill the water tank with tap
water (See Filling the
water tank).
Insert the plug into a wall
power socket and adjust the
temperature regulator 8 to
the desired ironing tempera-
ture.
Arrange for the steam iron
to be repaired by qualified
specialists.
SDB 2400 F4