Key To Symbols; Symbols On The Machine And/Or In The Manual - Husqvarna 129DJx Manual De Instrucciones

Symbols on the machine and/or in
the manual:
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and
understand the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• A protective helmet where there is
a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters (50 ft.).
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Machines fitted with saw
blades or grass blades can
be thrown violently to the
side when the blade comes
into contact with a fixed
object. This is called blade
thrust. The blade is capable
of amputating an arm or leg.
Always keep people and
animals at least 15 meters (50 ft.) from the machine.
2 – English

KEY TO SYMBOLS

Arrows which show limits for handle
positioning.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
10000
Visual check.
The engine exhaust from this product
contains chemicals known to the State
defects or other reproductive harm.
of California to cause cancer, birth