Sharpening Cutting Teeth - Husqvarna PA 1100 Manual De Instrucciones

2 Cutting angle
3 File position
4 Round file diameter
5 File depth
1
5
It is very difficult to sharpen a chain correctly without the
right equipment. We recommend that you use our file
8 – English
SAFETY INSTRUCTIONS
gauge. This will help you obtain the maximum kickback
reduction and cutting performance from your chain.
WARNING! The following faults will
!
increase the risk of kickback
considerably: File angle too large
Cutting angle too small
File diameter too small

Sharpening cutting teeth

• To sharpen cutting teeth you will need a round file and
a file gauge.
• Check that the chain is correctly tensioned. A slack
chain will move sideways, making it more difficult to
sharpen correctly.
• Always file cutting teeth from the inside face outwards.
Reduce the pressure on the return stroke. File all the