Other Functions; Switching The Display Illumination; Switching The Button Illumination; Using The Aux Source - Pioneer Super Tuner III D DEH-P6700MP Manual De Instrucciones

Section
11

Other Functions

Switching the display
illumination
You can change the color of the display illumi-
nation.
% Press ILLUMINATION.
ILL:CHG appears in the display.
Each time you press ILLUMINATION the color
changes:
RAINBOW(rainbow)WHITE(white)
SKYBLUE(sky blue)O-Blue(ocean blue)
DEEPBLUE(deep blue)PINK(pink)RED
(red)AMBER(amber)ORANGE(orange)
GREEN(green)P-GREEN(pure green)
Note
RAINBOW setting cycles continuously through
all the colors.
Switching the button
illumination
You can change the color of the button illumi-
nation.
1 Press ILLUMINATION and hold until
KEY:CHG appears in the display.
2 Press ILLUMINATION to select a button
illumination color.
Each time you press ILLUMINATION the color
changes:
WHITE(white)SKYBLUE(sky blue)O-Blue
(ocean blue)DEEPBLUE(deep blue)PINK
(pink)RED(red)AMBER(amber)
ORANGE(orange)GREEN(green)
P-GREEN(pure green)
42
En
Notes
! When the color of the display illumination is
set to RAINBOW, the button illumination is
changed to RAINBOW simultaneously. If you
want to change the button illumination,
change the display illumination to colors
other than RAINBOW, and then operate the
button illumination function.
! It is not possible to swich from the display illu-
mination setting to the button illumination
setting directly. First press BAND to return to
the normal display, then try again.

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on the previous page.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.