Master Forge 1010048 Manual Del Usuario página 9

E. Open the hood and then secure the
hood hinge screws in place using two
cotter pins (FF). Shown in Fig. 1D.
Note Put the assembled grill & hood
to the side and then proceed to the next
steps.
Hardware Used
FF
Cotter pin
2. Assemble the left cart side
Attach the cart leg back left (H) and cart
leg front left (J) to the cart side brace G
using four 1/4-20 x 1/2 in. screws BB
and four 5/32-32 x 3/8 in. screws AA).
Shown in Fig. 2.
Hardware Used
5/32-32 x 3/8 in.
AA
Screw
1/4-20 x 1/2 in.
BB
Screw
3. Assemble the right cart side
A. Attach the cart leg back right (U) and the
cart leg front right (T) to the Cart side
brace (G) using four 1/4-20 x 1/2 in.
screws BB) and four 5/32-32 x 3/8 in.
screws AA). Shown in Fig. 3.
Hardware Used
5/32-32 x 3/8 in.
AA
Screw
1/4-20 x 1/2 in.
BB
Screw
x 2
x 4
x 4
x 4
x 4
9
1D
FF
2
BB
AA
J
3
BB
AA
T
lowes.com/masterforge
H
G
U
G
®