Net Remote - auna Connect Vertical Manual Del Usuario

Notes
• The operational range between the unit and the device is approximately
8 metres.
• For better signal reception, remove any obstacles between the unit and
the BT device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video remote Control Profile) functions. This can only be
paired with one BT device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the BT function may connect and disconnect
as you make and end calls. This is not an indication of a problem with
your unit.

NET REMOTE

The device gives a feature of NetRemote by smartphone or tablet in iOS or
Android system. By downloading the assigned app named UNDOK, you can
view all the modes of Internet radio, Podcasts, Spotify, DAB, FM , CD, USB,
BT and AUX in. Search UNDOK from Google Play or Apple Store for UNDOK
app, and install it to your smartphone or tablet.
Before using the UNDOK app, make sure the device and the smartphone or
tablet are in the same WiFi network. Launch the app.
The app initializes and scans for the device in the network. Tap the device to
make the NetRemote connection.
Once the smartphone or tablet has already accessed the device, they will
automatically connect the next time when you open the app again.
• Be aware that if another smartphone or tablet with the app in the same
network has access with the device; the original connection will be cut
off.
Note: When it is the first time that you connect the device to the unit,
the app may ask you to enter the PIN. Default PIN is 1234. For details of
changing the PIN for security, please refer to System Settings section:
Network - NetRemote PIN Setup. Select your desired mode in the main
page. You may then control the selected mode on your smartphone or
tablet and on the device simultaneously.
EN
71