Tools And Materials; Before You Begin - Kohler STERLING 6205 Serie Guia De Instalacion

Tools and Materials

Tape
Pencil
Measure
Safety Glasses
Adjustable
Pliers
Wrench
Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few minutes to review this manual before
you start installation. If you encounter any installation or performance problems, please don't hesitate to
contact us. Our phone numbers are listed on the back cover. Thanks again for choosing Sterling.

Before You Begin

NOTE: Clear silicone sealant is recommended. Use of acrylic or other caulks is not recommended.
Please read these instructions carefully to familiarize yourself with the required tools, materials, and
installation sequences. Follow the sections that pertain to your particular installation. This will help
you to avoid costly mistakes.
Review the manufacturer's instructions for the plumbing components, shower doors, and any other
accessories that you plan to install.
Observe all local plumbing and building codes.
Do not remove the old fixture before you unpack and inspect the new unit.
Unpack and inspect the received components for damage. If you find any damage, do not install the
component. Report any shortages or damages immediately to the place of purchase.
After inspection, return the components to the carton until you are ready to install them.
ADA Considerations—Refer to the Roughing-In
When possible, a side entrance to the unit should be employed to ensure the easiest wheelchair
accessibility.
Consider the path of the wheelchair user when building the clear floor space. Be sure there is
sufficient room for a wheelchair user to enter the room and maneuver the wheelchair to the unit.
• For side entrance: The floor should be clear at least 36" (91.4 cm) out from the front of the shower
unit. Side to side, the clear area must extend at least 48" (121.9 cm) from the plumbing end wall.
• For front entrance: The floor should be clear at least 48" (121.9 cm) out from the front of the shower
unit. Side to side, the clear area must extend at least 48" (121.9 cm) from the plumbing end wall.
1016220-2-C
Claw
Square
Hammer
Pipe Wrench Level
Masking
Drill
Tape
Plus:
• Conventional woodworking
• Drop Cloth
Assorted
• Hole saw or jigsaw with fine
Screwdrivers
Strap Wrench
Clear Silicone
Sealant
2
tools and materials
tooth blade (32 teeth per inch)
Sterling