Prepare The Site - Kohler STERLING 6205 Serie Guia De Instalacion

Ocultar thumbs Ver también para STERLING 6205 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

B
A
Diagrams shown are representative and for use with the table only.
Your fixture may appear different from the illustrations.
Roughing-In
A
62050115
39-3/8"
(100 cm)
G
62050115
3-5/16" D.
(8.4 cm)
IMPORTANT! All dimensions are nominal. The stud opening tolerance is plus 1/8" (3 mm) and minus 0.
Carefully measure your fixture before determining enclosure size. When a fire rated wall is specified,
dimensions are to the inside of the wall board. Some shimming between the stud frame and the fixture
may be required. Dimensions given in the roughing-in information are crucial for proper installation.
Construct the framing and plumbing accurately.
NOTE: If a firewall is required, roughing-in dimensions will have to increase according to the thickness of
the firewall material. Stud opening dimensions must be measured toward the exposed side of the wall
material.
NOTE: If installing this unit to a masonry wall, make provisions for plumbing connections. Construct a
separate frame wall a minimum of 6" (15.2 cm) from the masonry wall.

1. Prepare the Site

Refer to the Roughing-In section for dimensions.
The receptor and optional wall surrounds can be installed directly to the framing studs or installed over
wallboard or other water-resistant material. When installing over wallboard or other water-resistant wall
material, the framing dimensions must be increased to accommodate the material thickness.
If a firewall is required, roughing-in dimensions will have to increase according to the thickness of the
1016220-2-C
ADA Floor Space Considerations:
36"
C
(91.4 cm)
D
48" (121.9 cm)
48"
(121.9 cm)
48" (121.9 cm)
E
B
C
19-5/8"
40-5/8"
(49.8 cm)
(103.2 cm)
H
J
10-1/2" D.
13"
(26.7 cm)
(33 cm)
Represents clear floor space for 36" (91.4 cm) x
48" (121.9 cm) side entrance.
Represents clear floor space for 48" (121.9 cm) x
48" (121.9 cm) front entrance.
F
Recommended Roofing
Nail Locations (4 total)
D
18-3/4"
(47.6 cm)
K
L
8"
4"
(20.3 cm)
(10.2 cm)
4
N
F
J
K
H
G
A
E
F
73-1/4"
12"
(186.1 cm)
(30.5 cm)
M
N
29"
15-3/8"
(73.7 cm)
(39.1 cm)
M
L
Sterling

Publicidad

Tabla de contenido
loading

Tabla de contenido