Heath Zenith 7368 Manual Del Usuario página 4

4
WARNING: Disconnect chime unit from power source before
opening chime access door. Close door and replace screw before
reconnecting to power.
The chime has different selectable tunes: Ding (one note tune), Ding-Dong
(two note tune), or Westminster (eight note tune). The factory setting is for the
Westminster tune. This tune can be changed by following the instructions in
the Tune Setting Table.
Note: All chime models are designed to work with up to 5 transmitters (push
buttons and/or sensors – sold separately). All chimes are designed to play only
two different tunes no matter how many transmitters are used.
CR2032
Inside Push Button
Tune Setting Table
Push Button /
Sensor
Jumper - ON
Jumper - OFF
Helpful Videos – www.hzsupport.com
Tune Settings
CR2032
Inside Sensor
Chime
———
Press and release button on chime.
Listen for selected tune. Repeat to
select different tune.
Multifunction Button
Ding
Ding-Dong or
Westminster
Helpful Answers – 1-800-858-8501
Tune