Vision Fitness T600 Manual Del Usuario página 13

BEFORE YOU BEGIN
LOCATION OF THE TREADMILL
Place the equipment on a level and stable surface away from direct sunlight. The intense UV light can cause
discoloration on the plastics. Locate the equipment in an area with cool temperatures and low humidity. Please
leave a clear zone behind the treadmill that is at least the width of the treadmill and at least 79" (2 meters)
long. This zone must be clear of any obstruction and provide the user a clear exit path from the machine. For
ease of access, there should be an accessible space on both sides of the treadmill of at least 24" (0.6 meters) to
allow a user access to the treadmill from either side. Do not place the treadmill in any area that will block any
vent or air openings. The treadmill should not be located in a garage, covered patio, near water or outdoors.
LEVELING THE TREADMILL
It is extremely important that the levelers are correctly adjusted for proper operation. Turn leveling foot
clockwise to lower and counter-clockwise to raise treadmill. Adjust each side as needed until the treadmill is
level. An unbalanced unit may cause belt misalignment or other issues. Use of a level is recommended.
MOVING THE TREADMILL
To avoid damaging parts when moving the treadmill, only lift from areas
A
or as shown in the image.
A B
B
0.3 (1 )
m ft
0.6 0.6
m m
(2 ) (2 )
ft ft
2 (79")
m
WARNING!
Our equipment is heavy, use care and additional help if
necessary when moving. Failure to follow these instructions
could result in injury. Never operate equipment if it has
a damaged cord or plug, if it is not working properly,
if it has been damaged, or immersed in water. Contact
Customer Tech Support for examination and repair.
0.6
m
(2 )
ft
13