Installing The Application; Starting Up And Configuring The Application - Erreka IRTAGPROG Manual Del Instalador

3

INSTALLING THE APPLICATION

1 Follow the manufacturer's instructions to install
Windows and NetFrame.
2 Insert the supplied CD in the PC's CD-ROM unit.
3 Go to the CD-ROM unit.
My PC > Extractable storage devices.
4 Click on the "set up.exe" executable file
5 Install the application, following the steps of the set-
up assistant.
4

STARTING UP AND CONFIGURING THE APPLICATION

Start up the application
INSTALLATION, START-UP AND CONFIGURATION
1 Connect the console to the PC and to the power
supply (see "Fig. 2 Console connection" on page 30).
2 Start up the application. This can be done in two
different ways:
• by clicking on the icon
Windows desktop during setup, or
• by clicking on the "Gestion_roller.exe" file in the
Windows folder where it was installed.
3 Read the welcome screen and click on the "Accept"
button.
IRTAGPROG console and "Roller and Key-Tag Management" application
created on the
31