Erreka IRTAGPROG Manual Del Instalador página 43

Define key-tag codes (reserve entries for key-tags)
WORKING WITH THE DATABASE

The "Reserve entries" function is used to define the
codes which will subsequently be recorded in the
receiver memory cards and key-tags (see "Record
transmitters" on page 41 and "Generate memory
card" on page 42 respectively).

The code for each key-tag is generated with the
installation number and the key-tag number in this
installation.
1 Key-tags can be reserved by clicking on the key-tag
tab.

The programme will warn you that none have yet
been reserved.
2 Click on "Reserve entries" and repeat steps 3 and 4
of "Define transmitter codes (reserve entries for
transmitters)" on page 38.

The key-tag user table is generated.
IRTAGPROG console and "Roller and Key-Tag Management" application
39