Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WORKING WITH THE DATABASE
Record key-tags
Generate memory card
42
Installation and Use Manual
1 Select the "Key-Tag" tab.
2 Select the key-tags to be recorded and click on the
"Record Entries" tab.
This can also be done using "Record Entries" in
the > "Options Menu" or by right clicking.
3 If you wish, fill in the user details for the selected
key-tags (optional details).
4 Click on the "Next" button.
This will open up the "Record Key-Tags" screen.
5 Place the key-tag to be recorded in a vertical position
in the centre of the console receiver circle (see
"Console connection" on page 30).
Click on "Record" in the pop-up window.
The key-tag is ready to work in the installation
(provided the memory card is recorded and installed
in the receiver (see "Generate memory card" on
page 42).
O
Before generating the memory card, it is necessary
to reserve all the transmitters or key-tags to be used
in the installation. Any transmitters or key-tags
reserved after generating the memory card will not
be operative.
1 Open the installation.
2 Click on the "Generate Memory Card" tab.
The "Record Memories" screen is displayed.
3 Use this screen to select the memory card to be
generated (for transmitters or for key-tags) and click
on "Next".
4 Insert the memory card in slot A in the IRTAGPROG
console and click on "Save".
Once the previously recorded memory card is
inserted in the plug-in receiver, the transmitters or
key-tags are ready for use.
Once the memory card has been generated, the
installation remains closed. Any subsequent change
will not be shown (it is necessary to reformat and
generate the memory card in order to include the
changes).
Publicidad
Capítulos
Tabla de contenido
