Working With The Database; Uses Of The Application - Erreka IRTAGPROG Manual Del Instalador

WORKING WITH THE DATABASE

1

USES OF THE APPLICATION

Installations Management (storing data
in the database)
The "Roller and Key-Tag Management" application of
the IRTAGPROG console allows you to manage all your
installations:
• Control your installation data: installers assigned,
contact details, maintenance agreements...
• Assign and record transmitters and key-tags for
each installation.
• Associate users to transmitters and key-tags.
• Record receiver memory cards.
• Block and unblock transmitters and key-tags of
specific users.
• Replace transmitters and key-tags in the event of
loss or theft.
Application home screen
Home screen (when there is no installation
stored)
1 "New Installation" icon: allows new
installation data to be entered (see "Creating
and defining a new installation" on page 36)
2 "Open" icon: allows access to the data of a
previously created installation (see "Opening an
installation" on page 44)
3 "Search" icon: allows searches for data in
previously created installations (see "Running
searches" on page 45)

This function is very useful and powerful
both in order to locate installations and
to find users and transmitters.
Direct use (without storing the
installation data in the database)
The "Roller and Key-Tag Management" application
also has a direct menu which will allow you to manage
transmitters, key-tags and memory cards without
having to enter them in the database of the application.
• Record, replace or read transmitters.
• Record or read key-tags.
• Record, copy, delete and read memory cards
• Block and unblock key-tags or transmitters

To know how to use this function, see "Working
without the database (console menu)" on page 48.
The system is compatible with Roller Code type
transmitters, proximity key-tags and memory cards.
Home screen (when there are installations
4 "Print" icon: allows the installation data to be
printed (see "Printing" on page 47)
5 "Console" icon: allows transmitters, key-tags
and memory cards to be used without having to
associate them to an installation (see"Working
without the database (console menu)" on
page 48)

This function is very useful when the
same settings are used in the transmitters
and in the memory card, with only the
installation number varying.
IRTAGPROG console and "Roller and Key-Tag Management" application
stored)
English
35