Erreka IRTAGPROG Manual Del Instalador página 36

INSTALLATION, START-UP AND CONFIGURATION
Configure the communication port
32
Installation and Use Manual
After connecting the console to a USB port of the
PC:
1 Install the adapter in line with the manufacturer's
instructions.
2 Check which COM port the adapter is installed in
(this depends on the USB port in the PC where the
adapter is inserted).

The port assigned to the adapter can be checked by
going to "Start > Control Panel (1) > System (2) >
Hardware (3) > Device Manager (4) > COM Ports
(5)" (this path depends on the version of Windows
installed).
In the example the assigned port is COM4 (6).

We recommend always using the same USB port. If
a different USB port is assigned, the assigned COM
port will also change and configuration will need to
be repeated.
3 Click on the "ERREKA"
4 Click on the "Options" button.
5 In the "Connection port" drop-down menu, select
the COM port used by the adapter (in the example
it is COM4).
6 Click on the "Accept" button.
icon.