Replacing, Modifying, Deleting Or Reserving Transmitters Or Key-Tags; Blocking And Unblocking Transmitters Or Key-Tags - Erreka IRTAGPROG Manual Del Instalador

4

REPLACING, MODIFYING, DELETING OR RESERVING TRANSMITTERS OR KEY-TAGS

5

BLOCKING AND UNBLOCKING TRANSMITTERS OR KEY-TAGS

WORKING WITH THE DATABASE
1 Select the "Roller" or "Key-Tag" tab.
2 Go to the "Options Menu" and choose the required
option:
• Record Replacement (in the event of loss or theft
of the transmitters or key-tags)
• Edit or delete existing transmitters or key-tags
• Reserve new transmitters or key-tags
O
All modifications made in transmitters and key-tags
must be recorded in the receiver memory card in
order for them to be operative (see "Generate
memory card" on page 42).
Allows a transmitter or key-tag to be blocked,
temporarily preventing it from working in the
installation.

This can be useful, for example, to block transmitters
in a residential complex where a user does not pay
the monthly garage rent, or in a hotel where the
customer does not return the transmitter when
checking out.
1 Open the installation and select the "Roller" or "Key-
Tag" tab.
2 Insert the memory card in slot A in the IRTAGPROG
console (see "Console connection" on page 30).
3 Hover over the cell for the transmitter or key tag in
the user table (contacts).
4 Right click on the column "Block".
5 Click on the drop-down option which shows "Block/
Unblock", depending on whether you want to block
or unblock a transmitter or key-tag.

"Yes/No" is displayed in the Block column.
O
All modifications made in transmitters and key-tags
must be recorded in the receiver memory card in
order for them to be operative (see "Generate
memory card" on page 42).
IRTAGPROG console and "Roller and Key-Tag Management" application
43