Working Without The Database (Console Menu); Accessing The Console Menu; Operations With Transmitters - Erreka IRTAGPROG Manual Del Instalador

WORKING WITHOUT THE DATABASE (CONSOLE MENU)

1

ACCESSING THE CONSOLE MENU

If required, the memory cards and transmitters can be
particularised directly without complete installation
management.
2

OPERATIONS WITH TRANSMITTERS

Record transmitter
Replace transmitter
48
Installation and Use Manual
This way of working is more basic, although it can be
very useful when all the installations have the same
transmitter, key-tag and memory card settings.
1 Click on the "Console" icon (1).

Three submenus can be accessed from the
console in order to directly particularise transmitters,
key-tags and memory cards.
O
Do not record transmitters close to a receiver, as this
may activate programming mode and modify the
memory. If there is a receiver nearby, disconnect its
power supply.
1 Fill in the installation number, transmitters number
and the code from which programming will start.
2 Connect the transmitter to the console using the
corresponding cable (see "Console connection" on
page 30).
3 Click on "Record".
1 Fill in the installation number, transmitter number
and the replacement number of the new transmitter.
2 Connect the transmitter to the console using the
corresponding cable (see "Console connection" on
page 30).
3 Click on "Record".