Etac Molift RgoSling / www.molift.com / www.etac.com
B
Sling application
1
B1.Hold the sling with one hand and use the other
hand to support the patient while leaning him
forward. Slide the sling down behind the user's
back. Place the sling approximately in waist height
on the back.
3
B3. Place RgoSling Standup around the waist of
the user and tighten the belt.
2
B2. It is recommended to be two assistants when
applying RgoSling with support. Place the support
under the user. This is easier if the patient can lean
forward. The support should hang loosely behind
his back. Tighten the support so much that it acts
as a support when lifting. It must not be tightened
so that it takes up the whole load.
4
B4. Place the lifter in position for fastening the
sling to the suspension
8.