Useful Information; Caractéristiques Techniques - Atlas Copco W2620 Manual Del Usuario

Safety Information
• Operate and maintain the tool, and select, maintain and
replace the accessories and consumables, in accordance
with this instruction manual;
• Do not use worn or ill-fitting screwdriver bits, sockets or
extensions.
• Do not touch sockets or accessories during impacting.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your ex-
posure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out micro-
scopic particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
• This tool is not recommended for use in potentially ex-
plosive atmospheres.
DO NOT DISCARD – GIVE TO USER

Useful information

Website
Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
6 © Atlas Copco Industrial Technique AB - 9836 5255 00
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art
preventive maintenance through its ToolCover contracts. For
further information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains technical information for all
hardware and software products such as:
- Safety Information including declarations, standards and di-
rectives
- Technical data
- Installation, Operation and Service Instructions
- Spare parts lists
- Accessories
ServAid is continuously updated and is available at:
https://servaid.atlascopco.com
For further information contact your local Atlas Copco repre-
sentative.
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
For more information, consult the website:
www.atlascopco.com/sds
Caractéristiques techniques
Données produit
Pression de service maximum
Vitesse à vide
W2620
bar
( psi rel.)
170 tr/min
( rpm)