Noise And Vibration Declaration Statement; Additional Vibration Information - Atlas Copco LH 11 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions
Noise and vibration
declaration statement
Guaranteed sound power level in accordance with
directive 2000/1/EC.
Sound pressure level in accordance with EN/ISO
11203.
Vibration value in accordance with EN/ISO
8662-5.
Please see table "Noise and vibration data".
These declared values were obtained by
laboratory type testing in accordance with the
stated directive or standards and are suitable
for comparison with the declared values of other
tools tested in accordance with the same directive
or standards. These declared values are not
adequate for use in risk assessments, and values
measured in individual work places may be higher.
The actual exposure values and risk of harm
experienced by an individual user are unique and
depend upon the way the user works, in what
material the machine is used, as well as upon the
exposure time and the physical condition of the
user, and the condition of the machine.
We, Atlas Copco, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
20
www.CrowderSupply.com • Toll Free: 888-883-5144
© 2007 Atlas Copco Construction Tools AB
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
Additional vibration
information
This machine may cause hand-arm vibration
syndrome if its use is not adequately managed.
Vibrations from handheld machines are
transmitted into the hands via the handles.
The handles on Atlas Copco's ergonomic breakers
are designed to dampen a large part of the
vibrations. Although vibrations are not eliminated
completely, the measures taken to contain
vibrations mean that the breakers can operate
for longer periods of time with reduced risk of
progressive injury.
Always use vibration-damped machines if
available.
We recommend a programme of health
surveillance to detect early symptoms that may
relate to vibration exposure, so that management
procedures can be modified to help prevent
significant disability.
| |
No. 3392 5010 83 f 2007-03-06