Clearance And Ventilation; Video Card Requirements; Using The Standard Controls For The Video Card; Supported Video Display Modes And Refresh Rates - 3M C3266PW Guia Del Usuario

12

Clearance and Ventilation

Leave at least two inches of clearance space behind the Multi-Touch Chassis Display for
proper ventilation. Units have vent holes at the top and bottom on the back of the chassis
-- ensure these holes are not blocked during installation. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable and continued
operation.
Note: Be sure to leave at least 2 inches clearance around fan inputs.
Refer to the published specifications for the maximum and minimum operating
temperature and humidity conditions. Refer to the product data sheet on the 3M Touch
Systems website at http://www.3m.com/touch/.

Video Card Requirements

Confirm your computer has a video card that supports the native video resolution of 1920
x 1080 for the Multi-Touch Chassis Display.

Using the Standard Controls for the Video Card

In addition to the standard controls on the display, each video card has several controls
that let you adjust the display settings. The software and driver for each video card is
unique. In most cases, you adjust these settings by using a program or utility provided by
the manufacturer of the video card.

Supported Video Display Modes and Refresh Rates

Your video card should support one of the display modes specified below. If you select
an unsupported mode, the display may stop working or display an unsatisfactory image.
All manuals and user guides at all-guides.com
Display Mode Refresh Rate (Hz)
640 x 480 60
800 x 600 60
1024 x 768 60
1152 x 864 70
1280 x 720 60
1280 x 768 60
1280 x 960 60
1280 x 1024 60
1360 x 768 60
1366 x 768 60
1600 x 1200 60
1680 x 1050 60
1920 x 1080 60
3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch Chassis Display User Guide