Check Before Treatment - NSK S-Max M15 Manual Del Usuario

1. Mounting/Removing the Handpiece and Motor
1) Mounting
Align the handpiece to the Motor and push together. For M15l,M25L,M95L, Locate the handpiece and alignment pin straight into
positioning of the motor.
2) Removing
Hold the motor and the handpiece, and pull off carefully, in a straight line.

2. Check before treatment

Check that the Head Cap is firmly tightened. Also check for handpiece vibration, noise and overheating. If any abnormalities are
found do not use the handpiece and contact your Authorised NSK Dealer.
3