Carton Contents; Add Engine Oil - Briggs & Stratton GENERAC 2300PSI Manual Del Propietário

Ocultar thumbs Ver también para GENERAC 2300PSI:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT: Read entire owner's manual before you
attempt to assemble or operate your new pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat.
• Remove the parts bag, accessories, and insert included
with pressure washer.
• Roll the pressure washer out the open end of the
carton.
• Raise guide handle, secure in place (Figure 1).
Figure 1 — Attach Accessory Tray
Lift the handle to upright
position and slide the
locking caps into place.
• Check carton for additional loose parts.

Carton Contents

Items in the carton include:
Main Unit
Goggles
High Pressure Hose
Spray Gun
Nozzle Extension
Oil Bottle
Parts Bag (which includes the following):
Maintenance Kit
Quick Connect
Owner's Manual
Generac Portable Products 2300 PSI Pressure Washer
Engine Manual
Owner's Registration Card
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-270-1408.
To prepare your pressure washer for operation, you
will need to perform these tasks:
• Fill out and send in registration card.
• Add oil to engine crankcase.
• Add fuel to fuel tank.
• Connect high pressure hose to spray gun and pump.
• Connect water supply to pump.

Add Engine Oil

IMPORTANT: Any attempt to crank or start the engine
before it has been properly serviced with the
recommended oil may result in an engine failure.
• Place pressure washer on a level surface.
• Refer to the engine owners manual to add recommended
oil to engine.
NOTE: Check oil often during engine break–in. Refer to
engine owner's manual for recommendations.
Add Gasoline
WARNING!
fill fuel tank when engine is running or hot. Do Not
smoke when filling fuel tank.
WARNING!
Provide space for fuel expansion.Wipe away any fuel
spillage from engine and equipment before starting.
• Use fresh, clean unleaded automotive gasoline and store in
approved, clean, covered containers. Use clean fill funnels.
Never use "stale" gasoline left over from last season or
gasoline stored for long periods.
• Clean area around fuel fill cap, remove cap.
5
Never fill fuel tank indoors. Never
Never fill fuel tank completely full.

Publicidad

Tabla de contenido
loading

Tabla de contenido