Extraction mode unit with internal remote fan unit
AR 400 743
1
Attach the exhaust air pipe directly to the remote
fan unit's air pipe connector
2
Connect it to the air extractor opening
3
Seal the joints appropriately.
16
.
(A)
.
(B)
Extraction mode units without internal remote fan unit
AR 400 743
1
Unscrew the connecting pieces from the cover
plate in the ventilation hood. Secure the exhaust air
pipe to the connecting piece. Screw the connecting
piece to the cover plate in the ventilation hood.
2
Connect it to the air extractor opening.
3
Seal the joints appropriately.
Connecting the power supply
1
Plug the mains plug into the grounded socket.
2
If a fixed connection is required, please follow the
Electrical Connection
instructions in the
section.