Safety Information
Declarations
Product description
1 Second trigger
2 Principle trigger
3 Display screen
4 Settings buttons
5 Reporting LEDs
6 Reverse button
7 Reaction bar s-type (delivered with the tool)
EU DECLARATION OF CONFORMITY
We, CHICAGO PNEUMATIC Tool Co.LLC, 1815 Club-
house Road, Rock Hill, SC 29730 - USA, declare under our
sole responsibility that the product (with name, type and se-
rial number, see front page) is in conformity with the follow-
ing Directive(s):
2006/42/EC, 2011/65/EU, 2014/53/EU
Harmonized standards applied:
EN 62841-2-2:2015 + AC1:2015, EN
61000-6-2:2005,EN61000-6-3:2007+ A1:2011, EN
61326-2-3:2013, EN 301 489-1 V2.2.0, EN 301 489-3
V2.1.1
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain, 09/06/2020
Pascal ROUSSY
Signature of issuer
Noise and Vibration Declaration Statement
• Sound pressure level < 72 dB(A) , uncertainty 3 dB(A),
in accordance with EN 62841-2-2:2015.
• Sound power level < 83 dB(A) , uncertainty 3 dB(A), in
accordance with EN 62841-2-2:2015.
• Vibration total value < 2.5 m/s
accordance with EN 62841-2-2:2015.
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
8
2
2
, uncertainty 3 m/s
, in
© Chicago Pneumatic - 6159925520
CORDLESS NUTRUNNER
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, CHICAGO PNEUMATIC Tool Co.LLC, cannot be
held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
https://www.p65warnings.ca.gov/
RF Exposure Statement
This portable transmitter has been tested and found to com-
ply with FCC General Population RF Radiation Exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines. The an-
tenna used for this device must not be co-located or operating
in conjunction with any other antenna or transmitter.
Wireless communication specifications
BLUETOOTH LOW ENERGY 4.2®
Frequency: 2400 MHz - 2483.5MHz
EIRP: <10 dBm
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc
Safety
DO NOT DISCARD - GIVE TO USER
http://
and selecting 'Tools' then 'Legis-