Bare Wire Connections; Use The Pre Out Outputs To Connect The Surround Back Speakers - Pioneer VSX-819H Manual De Instrucciones

Connecting up

Bare wire connections

A-Speaker terminals:
1 Twist exposed wire strands together.
2 Loosen terminal and insert exposed wire.
3 Tighten terminal.
1 2
10 mm
(3/8 in.)
B-Speaker terminals:
1 Twist exposed wire strands together.
2 Push open the tabs and insert exposed
wire.
3 Release the tabs.
1 2
10 mm
(3/8 in.)
Caution
• These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent
the risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before touching
any uninsulated parts.
• Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire touches the back panel it may cause
the power to cut off as a safety measure.
Use the PRE OUT outputs to connect
the surround back speakers
Connect the PRE OUT outputs of the unit and
additional amplifier to add a surround back
speaker.
Surround back
channel amplifier
3
3
• You can use the additional amplifier on the
ANALOG
INPUT
L R
SURROUND
AUDIO SPEAKERS
R BACK L (Single)
PRE OUT
SUBWOOFER
ZONE2
PRE OUT
OUT
R L
OUT DVR/VCR IN VIDEO
SPEAKERS
MONITOR OUT BD/DVD IN TV/SAT IN
P P Y
ANTENNA R B
OUT
FM
UNBAL
75 Ω
IN 2
(TV/SAT)
IN 1
AM
(BD/DVD)
LOOP
ASSIGNABLE
COMPONENT VIDEO 1 - 2
surround back channel pre-outs for a
single speaker as well. In this case plug
the amplifier into the left (L (Single))
terminal only.
Surround Back speakers
SBL SBR
A
FRONT SURRO
R L R
B Class 2 Wiring
R L
03
23
En