Festo CDVI Serie Breve Descripción página 14

Please note the following addressing rules:
The following table shows the address assignment of
the manifold blocks.
Further address assignment depends on the type of
the expansion block.
2 Bi−expansion block = 4 addresses
2 Mo−expansion block = 2 addresses
1 Bi−expansion block = 2 addresses
1 Mo−expansion block = 1 address
Complete the assignment list (following table) according
to the expansion blocks used on your valve terminal.
Please note
Maximum 8 addresses can be addressed in the exten
sion.
14 Festo CDVI... 0805c English