LW 1202 N/~SN / LW 1503/~S / LW 802 VR/~S
Contents
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating
instructions!
Wear goggles!
Disposal information for the old
machine (see page 21)!
For your safety
WARNING!
Before using the power tool, please read
and follow:
These operating instructions,
Ó
the "General safety instructions" on the
Ó
handling of power tools in the enclosed
booklet (leaflet
-
the currently valid site rules and the
Ó
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknow-ledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
used as intended,
Ó
in perfect working order.
Ó
Faults which impair safety must be repaired
immediately.
Intended use
Wet stone grinders are designed
Ó for commercial use in industry and trade,
Ó for the surface processing of natural stone
using suitable tools (sponge, foam rubber
and Velcro diamond wheels, corundum
grinding rings),
Ó for use with tools and accessories which
are indicated in this manual or
recommended by the manufacturer.
The permitted circum-ferential speed and
the maximum diameter must not be
exceeded.
Ó The machine must not be used for cutting
or roughing.
Chain cutting wheels, saw blades and all
tools which require a guard are not
permitted.
Machines without a PRCD switch must be
operated via an isolating transformer.
no.: 315.915),
13