Care And Cleaning - GE OPAL01GEPKT El Manual Del Propietario

Ocultar thumbs Ver también para OPAL01GEPKT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning

To keep your nuggest ice tasting fresh and your Opal
looking great, we recommend cleaning/sanitizing your
Opal at least once per week.
To clean the exterior of the ice maker, unplug the
product, then use a soft cloth dampened with soapy
water to gently clean the exterior surfaces. Dry with a
soft cloth.
The exterior stainless steel surfaces can be cleaned
with commercially available stainless steel cleaner. Use
only a liquid cleaner free of grit and rub in the direction
of the brush lines with a damp, soft sponge. Do not use
appliance wax, polish, solvents, or chemicals on the
stainless steel. Do not use soap to clean the reservoir.
Use a soft cloth moistened with water.
System Cleaning / Sanitizing Procedure
To clean Opal's internal components, complete the
following steps:
1. U nplug Opal.
2. R emove water filter (if present), and replace with the
reservoir's screened intake cap.
See Figure 1.
3. D rain Opal (see page 8 for detailed instructions).
4. P lug in Opal and slide the rear switch to the "clean"
position.
See figure 2.
5. The display ring will light up yellow and pulse.
See figure 3.
NOTE: Do not use soap to clean the water reservoir.
6. C reate a solution of five cups of water and one
tsp household bleach. Skip to page 8 for further
instructions on how to remove hard mineral deposits.
7. Pour solution into water reservoir.
See figure 4.
49-1000418 Rev. 2
WARNING
Chemical Exposure Hazard, when
cleaning with bleach, use bleach in a well ventilated area
and avoid mixing bleach with other household cleaners.
WARNING
Unplug the product before cleaning by
hand, and when not in use.
Cleaning
Figure 4
Figure 1
Ice
Figure 2
Figure 3
Water
Reservoir
Fill Line
7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido