AL-KO R4 Instrucciones De Montaje página 4

GB
Assembly instructions
for drawbar Models R4, Ausf. A1, A3, A4, Models K4, Ausf. A1, A2
Bolting the drawbar to the axle and clamp connection
„ Drawbar connection profile (a)
Fit the clamping bracket with four M12 hexagon bolts.
„
„ Drawbar connection profile (b)
Fit the drawbar using an M12 hexagon bolt.
„
Bolting the drawbar to the trestle and clamping bracket Model R4, Ausf. A1, A3, A4, Model K4, Ausf. A1, A2
L1
„ Attach the clamping bracket to the frame (front edge of the assembly) using two M12 bolts
Assembly procedure is the same for trestle a and b.
„
Optional: Model K4, Ausf. A2
max. zul. L1 = 1040
Caution!
Observe the length ratio (L1 : L 2 < 2,5) .
4
a
b
L2
L2
a
b
L1
< 2,5
L2
L1
< 2,5
L2
200
Translation of original user instructions
Drawbar