EAS ELECTRIC EMRH908VRT-W Manual Del Usuario página 22

LIGHTING
LIGHT REPLACEMENT
1.5W LED light.
 Remove the light by levering its fitting from the hood body(this may require pressure or force
to be applied).
 Disconnect the connector of the light.
 Replace the light with a new one of the same type,
making sure that you connect the light with the
light cable correctly.
 Reinstall the light back to the hood body.
Max Power
1.5W
LED module
DISPOSAL
DISPOSAL: Do not dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
The european directive 2012/19 /UE on wasted electrical and electronic equipments (WEEE),
requires that household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. appliances must be collected separately in order to optimize the recovery
and recycling of the materials they contain, and reduce the impact on human health and the
environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation,
that when you disposed of the appliances, it must be separately collected. Consumers should contact
their local authority or retailer for information concerning the correct disposal of their old appliance.
Voltage Picture
DC 12V
Lamp Cap
——
EN-10
ILCOS D code
DSS-1.5-S-33.2
/120
V.5