Appliances with incorrect or missing parts or without a security case are not to be operated. The
service center provides you with information concerning replacement parts.
Training
a)
Read the instruction carefully. Be familiar with the controls and proper use of the
equipment.
b)
Never allow children or people unfamiliar with these instructions to use the machine.
Local regulations can restrict the age of the operator.
c)
Never work while people, especially children, or pets are nearby.
d)
Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
e)
Major repair work shall be carried out only by specifically trained personnel.
Preparation
a)
WARNING-Petrol is highly flammable:
-
store fuel in containers specifically designed for this purpose;
refuel outdoors only and do not smoke while refueling;
-
add fuel before starting the engine. Never remove the cap of fuel tank or add petrol
-
while the engine is running or when the engine is hot;
if petrol is spilled, do not attempt to start the engine but move the machine away from
-
the area of spillage and avoid creating any source of ignition until petrol vapours have
dissipated;
-
replace all fuel tank and container caps securely.
b)
Replace faulty silencers;
c)
Before using, always visually inspect to see that the tools are not worn or damaged.
Replace worn or damaged elements and bolts in sets to preserve balance.
d)
Do not smoke near the machine.
e)
Do not wear loose clothing, jewellery, or similar items that could be caught in the starter or
other moving parts.
f)
Never put any items into the ventilation openings. Non-observance may lead to injury, or
damage to the machine.
g)
It is necessary reduction in power due to use in higher temperatures, altitudes and
humidity as below conditions.
1)
2)
3)
Operation
a)
Do not operate the engine in a confined space where dangerous carbon monoxide fumes
can collect
b)
Keep the machine free of oil, dirt and other impurities.
c)
Please always place the appliance on even and stable surfaces.
d)
Never operate the appliance inside buildings or in an environment without proper
ventilation. Pay attention to air flow and temperature.
Max Working Temperature: 40°C
Max altitudes: 1000 m
Max humidity: 95%
39