Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.
When saw chain are damaged
4.
In case of misfire
5.
In case of high vibration
6.
When flames or smoke appear
7.
In rain or stormy weather
Chain brake
The chain brake is a device which stops the chain instantaneously if the chain saw recoils due
to kickback.
Normally, the brake is activated automatically by inertial force. It can also be activated manually
by pushing the brake lever (Front handle guard) down toward the front.
To release brake, pull up the front handle guard toward the front handle till "click" sound is
heard.
WARNING!
When the brake operates, release the throttle lever to slow down the engine speed. Continuous
operation with the brake engaged will generate heat from the clutch and may cause trouble.
Be sure to check brake operation on the daily inspection.
How to confirm:
1) Turn off the engine.
2) Holding the chain saw horizontally, remove your hand from the front handle, and let the tip of
the guide bar hit a stump or a piece of wood, and check the brake is operating. Operating level
varies by bar size.
In case the brake is not effective, ask our dealer inspection and repairing.
Sawing
During cutting, please don't keep the running speed just above clutch engagement speed. Any
prolonged use at low speed is likely to cause premature wear of the clutch.
On the other hand, the user should not keep the engine speed in max speed after cutting. Any
prolonged use at the highest speed is likely to reduce lifetime of engine.
Always take care to maintain a well balanced and secure position.
CAUTION!
In an emergency, stop the engine by moving the engine switch to the stop position.
If the saw chain strikes stone or other debris, stop the engine and check whether something
has been damaged and the saw chain is still secure.
WARNING!
Before proceeding to your job, read "For Safe Operation" section It is recommended to first
practice sawing easy logs. This also helps you get accustomed to your unit.
Always follow the safety regulations. The chain saw must only be used for cutting wood. It is
forbidden to cut other types of material. Vibrations and kickback vary with different materials
and the requirements of the safety regulations would not be respected. Do not use the chain
49
Publicidad
Tabla de contenido
