Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex PE 150 18.0-EC Instrucciones De Funcionamiento Originales

PE 150 18.0-EC
Contents
Symbols used in this manual . . . . . . . . 15
For your safety . . . . . . . . . . . . . . . . . . . 15

For your safety . . . . . . . . . . . . . . . . . . . 15

Noise and vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Operating instructions . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 24
Disposal information . . . . . . . . . . . . . . . 24
-Declaration of Conformity . . . . . . . . 25
Exemption from liability . . . . . . . . . . . . . 25

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

To reduce the risk of injury, read
the operating instructions!
Wear goggles!
Disposal information for the old
machine (see page 24)!
For your safety
WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknow-ledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The polisher may be used only
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

The polisher is designed
- for commercial use in industry and trade,
- for all types of polishing work with
polishing sponges, lambskins and
woolskins, felt plate, buffing disc,
- for use with polishing tools which are
permitted to run at a speed of at least
1500 r.p.m.
Safety instructions for polishing
WARNING!
Read all safety warnings, instructions, illu-
strations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric
shock, fire and/or serious injury. Save all
warnings and instructions for future
reference.
no.: 315.915),
-
15