Before Using For The First Time; Initial Use; Basic Operation; Interrupting The Operation - Bosch BF.634G.1 Manual De Usuario E Instrucciones De Montaje

5 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
5.1 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings for the initial start-up of your appliance appear.
Notes
¡ You can adjust the settings at any time in the basic
settings.
→ "Basic settings", Page 13
¡ Open and close the appliance door for the internal
inspection before the initial start-up or after any
power failure.
6 Basic operation
6.1 Switching on the appliance
Press to switch the appliance on.
▶
a All of the touch fields light up red. The display
shows the Bosch logo, followed by the maximum
microwave output.
a The appliance is ready to use.
a lights up red.
6.2 Switching off the appliance
Press to switch the appliance off.
▶
a The appliance cancels the current functions.
a The display shows the time.
Note: Switch off your appliance when it is not being
used. If no settings are applied for an extended period,
the appliance switches itself off automatically.
6.3 Starting the operation
Use to start the operation.
▶
a The display shows the settings.
a The display ring appears and shows the end of the
cooking time.
Note: If you open the appliance door during operation,
the appliance interrupts the operation and maintains
the set time left. When you want to restart the opera-
tion, close the appliance door and press ⁠ .
Before using for the first time en
Setting the language
Use the control ring to set the language.
1.
Press ⁠ .
2.
a The display shows the next setting.
Setting the time
Use the control ring to set the time.
1.
Press ⁠ .
2.
a A message appears on the display confirming that
the initial start-up is complete.
Note: In the
→ "Basic settings", Page 13, specify whether or not
the display shows the time when the appliance is
switched off.
6.4 Interrupting the operation
Press ⁠ .
1.
a The appliance interrupts the operation.
Press to delete all settings.
2.
Note: When you open the appliance door, the appli-
ance interrupts the operation. After an operation is in-
terrupted or cancelled, the cooling fan may continue to
run.
6.5 Setting the operating mode
When you switch on the appliance, the display shows
the set default operating mode. You can start the sug-
gested operating mode immediately or set a different
operating mode.
Press the field for the required operating mode.
1.
Use the control ring to change the highlighted selec-
2.
tion.
If required, implement additional settings. To do this,
touch the relevant field and use the control ring to
change the value.
Press ⁠ .
3.
a The appliance starts the operation.
9