Changing The Timer; Cancelling The Timer; Basic Settings; Changing Basic Settings - Bosch BF.634G.1 Manual De Usuario E Instrucciones De Montaje

9.2 Changing the timer
Press ⁠ .
1.
a The display shows the timer.
Use the control ring to change the timer duration.
2.
Note: If an operating mode with a set duration is run-
ning, this duration is highlighted. You can use
lect the timer. The timer duration is highlighted for a
short time. You can change the timer duration.
10 Basic settings
You can configure the appliance to meet your needs.
10.1 Changing basic settings
Requirement: The appliance is switched off.
Press and hold for approx. 3 seconds.
1.
a The display shows information about the process.
Use to confirm this information.
2.
a The first setting "Language" appears on the display.
Turn the control ring to change the setting as re-
3.
quired.
Press ⁠ .
4.
a The next setting appears on the display and you can
use the control ring to change it.
5. Use to work through all of the information and, if
required, use the control ring to make changes.
To save changes, press and hold for approx. 3
6.
seconds.
a The display shows a notification confirming that the
settings have been saved.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
10.2 Discarding changes to the basic
settings
Press ⁠ .
▶
a All changes are discarded and not saved.
10.3 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and factory settings. The basic settings depend
on the features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
even after a power failure. Only the settings pertain-
ing to the initial start-up of the appliance need to be
implemented once again following a power failure.
→ "Initial use", Page 9
9.3 Cancelling the timer
Reset the timer duration.
▶
a Once this is implemented, the symbol no longer
lights up.
to se-
Basic settings Selection
Language
Time
Audible signal
Button tone
Display bright-
ness
Clock display
Night-time dim-
ming
Demo mode
Factory set-
tings
Factory setting (may vary according to model)
1
Note: Changes to the language, button tone and dis-
play brightness settings take effect immediately. All
other settings do not take effect until you save them.
10.4 Changing the time
Requirement: The appliance is switched off.
Press and hold for approx. 3 seconds.
1.
a The display shows information about the process.
Use
2.
a The first setting "Language" appears on the display.
3. Press
a The setting for the clock time appears.
Use the control ring to change the time.
4.
To save changes, press and hold for approx. 3
5.
seconds.
a The display shows a notification confirming that the
settings have been saved.
Set "Language"
Set "Time "
Short cooking time
Medium cooking time
Long cooking time
1
Switched off
Switched on
The display brightness can be adjus-
ted in 5 settings
1
Setting 3
1
Switched on
Switched off
1
Switched off
Switched on (display dimmed
between 10 p.m. and 6 a.m.)
1
Switched off
Switched on (this is only displayed in
the first 3 minutes following a reset
or the initial start-up)
Reset
1
Do not reset
to confirm this information.
⁠ .
Basic settings en
1
13