Replacing Air Filter - WLabs ZERA Manual De Uso Y Cuidado E Instrucciones De Instalación

Replacing Air Filter

The air filter is designed to continuously filter air.
The Replace Filter light may come on during a cycle, it is not
recommended to replace the filter while a cycle is running.
NOTE: For best performance, use only air filters recommended
for use in this food recycler.
1.
Replace filter indicator will light
If the air filter needs to be replaced, the Replace Filter indicator
light will turn on.
2.
Remove output bin
Press down on the retention tab and pull out to remove output
bin from the food recycler.
3.
Remove filter holder
Reach into output bin housing and insert fingertips into the
handle at the bottom of the filter holder. Pull up on the handle,
then pull filter holder out of the output bin housing.
4.
Remove old filter
Remove and recycle or discard the old filter.
For more information on recycling please visit www.zera.com.
5.
Install new filter
Place the provided filter into the filter holder, ensure that the tab
on the filter is properly aligned with the filter holder.
6.
Reinstall filter holder
Replace the filter holder into the output bin housing and snap
into place.
17
Alignment tab