WLabs ZERA Manual De Uso Y Cuidado E Instrucciones De Instalación página 8

6.
Install new filter
Place the provided filter into the filter holder, ensure that the tab
on the filter is properly aligned with the filter holder.
7.
Reinstall filter holder
Replace the filter holder into the output bin housing and snap
into place.
8.
Replace output bin
Ensure that the output bin is fully closed and latched.
9.
Lower leveling legs
Using your fingers, turn the leveling legs two to three turns to
lower slightly from the cabinet.
NOTE: Leveling legs can be moved up or down to level, but for
best performance they should not be removed to avoid exhaust
air blockage.
10.
Alignment tab
Check that the food recycler is level from front to back and
side-to-side. Adjust the leveling legs as necessary to level
the food recycler.
11.
Move the food recycler close to its final location and plug into
a grounded 3 prong outlet. Then, slowly move food recycler
into its final position.
Check that food recycler is still level. Repeat Step 9 if necessary.
8
Level food recycler
Not Level LEVEL
Plug into a grounded 3 prong outlet.
Not Level